OSHA’s Control of Hazardous Energy standard, 29 CFR 1910.147, known universally as lockout/tagout or LOTO — is consistently one of the top five most cited OSHA standards in manufacturing. Not because employers don’t have written programs. They do. The standard has been in force since 1989, and virtually every manufacturing facility with any mechanical equipment maintenance has a LOTO program.
The citations happen because written programs and field execution diverge. They happen because informal shortcuts become accepted practices. They happen because LOTO training is treated as a box to check rather than a life-safety competency to verify. And when they happen — when a worker is caught in a machine during maintenance because the energy wasn’t properly controlled — the consequences range from severe injury to fatality.
These are the five implementation gaps we find most consistent in LOTO programs.
Gap 1: Machine-Specific Energy Control Procedures That Aren’t Machine-Specific
OSHA’s standard requires written energy control procedures for each piece of equipment with hazardous energy sources that require LOTO for maintenance or service. The procedures must be machine-specific — they must identify the specific equipment, the specific energy sources, the specific lockout points, and the specific sequence for controlling each energy source.
What most facilities have instead: a generic procedure that describes the general LOTO process, with a note that employees should identify the energy sources for the specific machine. That is not a machine-specific procedure. It is a general training document — and it is specifically cited as non-compliant because OSHA requires that the procedure removes the need for the employee to identify energy sources in the field.
The corrective action is straightforward but time-consuming: every piece of equipment that requires LOTO must have its own documented procedure with machine-specific lockout point locations, energy types, sequence, and verification steps. For a 200-machine facility, this is a significant documentation project.
The Machine-Specific Standard
A machine-specific LOTO procedure should be usable by an authorized employee who has never worked on that machine. If the procedure requires the employee to use their judgment to identify energy sources, the procedure is not machine-specific — regardless of how detailed it appears.
Gap 2: Authorized vs. Affected Employee Training Confusion
OSHA’s LOTO standard distinguishes between two categories of employees: authorized employees (those who perform LOTO) and affected employees (those who work in areas where LOTO is used, but who don’t perform it themselves). The training requirements differ for each category.
The gap: facilities that provide LOTO training to authorized employees but fail to train affected employees on the purpose of LOTO, what to do when they encounter locked-out equipment, and what they must not do (attempt to remove a lock, restart locked-out equipment). An affected employee who removes a lock because ‘the machine looked fine’ has contributed to a potentially fatal incident — and an employer whose training program never addressed affected employee responsibilities is responsible.
Gap 3: No Periodic Inspection of Energy Control Procedures
29 CFR 1910.147(c)(6) requires that employers perform a periodic inspection of each energy control procedure at least annually, to certify that the procedure is adequate and that employees are familiar with it. The inspection must be performed by an authorized employee other than the one using the procedure being inspected.
This is one of the most commonly missed LOTO requirements. Facilities that have written procedures and trained employees frequently do not have records of annual procedure inspections — which is a separate citation category from having inadequate procedures.
The fix: a documented annual LOTO audit cycle with a responsible person, completion records, and a mechanism for updating procedures when equipment changes.
Gap 4: Contractor LOTO Coordination
When outside contractors perform maintenance on a facility’s equipment, OSHA requires that the facility’s energy control program be communicated to the contractor, and that the contractor’s program be communicated to affected employees. This bidirectional communication requirement is almost universally ignored in practice.
The result: contractors arrive with their own LOTO equipment and procedures, facility employees don’t know which machines are locked out by contractors, and contractors don’t know about facility-specific energy hazards. This is a citation waiting for a trigger event.
Effective contractor LOTO coordination requires a documented pre-work briefing, confirmation that the contractor’s LOTO procedures are consistent with OSHA’s standard, and a clear protocol for the application and removal of locks during contractor work.
Gap 5: Group LOTO Procedures That Don’t Protect Individual Workers
When a group of employees performs maintenance on the same piece of equipment simultaneously, OSHA’s standard requires procedures that provide equivalent protection to each individual employee, specifically, that every authorized employee must have their own lock on the energy isolation device, or that the group uses a hasp that holds all individual locks until the work is complete.
Common gap: facilities use a single supervisor lock for group LOTO procedures, on the premise that the supervisor speaks for the group. This is not sufficient protection. If the supervisor completes their work and removes their lock before the other employees are clear, the energy isolation is gone and anyone still working on the equipment is unprotected.
Group LOTO procedures must ensure that no individual protection can be removed without that individual’s knowledge and action. If your LOTO program depends on a few people who know how it really works, CFR’s 60-Second Gut Check covers the four places that programs break down when the knowledge sits with a few people, from the paper trail to the pre-audit scramble.
Is your safety program held together by tribal knowledge and spreadsheets? · Free
CFR Compliance Group · 877-CFR-1910 · info@cfrcompliancegroup.com · cfrcompliancegroup.com